Tuf-Tite Risers & Adapters

You are currently viewing Tuf-Tite Risers & Adapters. Click on any of the photos below for larger version. For more information on the products or services we offer please contact us and we'll be happy to answer any questions you may have.

Tuf-Tite Riser System Overview

Tuf-Tite makes a full line of Risers and accessories for Pre-Cast applications.

See photo and PDF (linked) for more detailed information.

Tuf-Tite - Riser System.pdf

Septic Tank Risers - 6in & 12in tall

Tuf-Tite makes a full line of Risers and accessories for Pre-Cast applications.

Septic tank risers stackable in 6" & 12" tall. Green only.

Riser to Tank Adapter

This can be mounted on any flat surface (plastic, plexiglass tanks or concrete risers). It may also be used on corrugated pipe where the rim is flat. Mount with butyl and screw down. It can be used in place of a TAR when the opening is completely inside the inside diameter of the RTT adapter. You may mount a riser, riser safety pan or lid on top.

-Fits on the 'shelf' of corrugated pipe.
-Line the bottom of adapter with butyl sealant then screw on.

Riser to Riser (RTR) Adapter

This can be used when encountering a competitor's riser that you want to convert and start to use Tuf-Tite risers/lids for. It may also be used on Corrugated pipe (if the rim is not flat). If you find a damaged lip on a Tuf-Tite riser, you can use this to install another riser on top or a new lid. You may mount a riser, riser safety pan or lid on top.

-Fits on the 'lip' of corrugated pipe.
-Line the inside of the bottom with butyl sealant (5/16") then set on top securely.

Tank Adapter Ring (TAR)

Tank Adapter Rings (TAR) are for mounting riser or lid to tank when casting is not an option.

Tuf-Tite offers adapter rings to convert virtually any old system to Tuf-Tite's superior components and makes a full line of Risers and accessories for Pre-Cast applications.

This is mounted on top of the tank with butyl sealant and concrete screws. You may mount a riser, riser safety pan or lid on top.

Internal Safety Lids

Safety Lids are available in 12", 16", 20" and 24" diameters.

24" diameter safety lids are made with 2 sets of screw holes for proper alignment in 6" tall and 12" tall risers.

Safety Lids sit on Riser Ledges with matching screw holes.

For safety the lid can be filled with concrete. Tuf-Tite's 'Concrete Keepers' lock the concrete into the lid.

Access hole allows pump-out without removal.

See PDF attached (link included) for installation details).

Tuf-Tite - Safety Lid.pdf